Skip to content

LAN IP RANGE

LAN IP Range works in conjunction with Auto Configuration of Standard Applications (see the Application Management section earlier in this chapter) and makes it possible to configure standard services running on the corporate network. Accops HySecure can automatically detect and list the services running on machines within a given subnet range. You can select a service from the list and register it with HySecure.

Creating IP Range

  1. In the management console, click Resources \ LAN IP Range. The Create IP Range screen appears.
  2. Type the first IP address in the range in the Start IP Address field.
  3. Type the last IP address in the range in the End IP Address field. NB: To specify single address, enter the same IP in the Start IP Address and End IP Address fields. The IP range cannot exceed 100 hosts.
  4. Type the subnet mask in the Subnet Mask field. Type the range description in the Description field.
  5. Click Submit to include the new range in Auto Configuration of Standard Applications or click Cancel to clear all data from this screen. The new range is added. Important: The defined IP ranges are displayed in the Select IP Range list when you opt for Auto Configuration of Standard Application on Create Application screen.

Editing IP Range

  1. In the LAN IP Range screen, click on the check box for the IP Range you want to edit and click Modify. The Modify IP Range screen appears.
  2. Modify the details as needed.
  3. Click Submit to save changes or click Cancel to abort.

Deleting IP Range

  1. Click on the check box for the IP range(s) you want to delete. To select all, click on the Check all box below the table.
  2. Click Delete to delete the selected range(s).
  3. When prompted for deletion confirmation, click OK to delete the range(s) or click Cancel to abort.