Upgrade Dedicated Gateway Node

1. Connect to Dedicated HySecure gateway as Security Officer.

   Note

   Do not connect using Virtual IP Address

2. Go to HA Configuration and put the HySecure node in maintenance mode by clicking Enable Maintenance Mode

   Note

   After this step, this gateway node will become inactive cluster node.

3. Go to HySecure STATUS > Upgrade Firmware and put the HySecure gateway in Configuration Mode. All active user connections to this gateway node will be disconnected.

4. Go to Host Maintenance > Upgrade Firmware and upload the HySecure Upgrade patch file. It may take sometime to upload the upgrade patch based on network bandwidth between your PC and Gateway.
5. Once the upgrade file is uploaded, upgrade will start automatically. Refresh the browser to verify if the upgrade has completed.
6. Check the Gateway version on the dashboard to confirm that the upgrade has completed.
7. Keep the gateway in configuration and maintenance mode.

Repeat above steps for all Dedicated HySecure Gateway nodes.