Endpoint Management
| Configuration Name | Description | Default Value | Tag |
|---|---|---|---|
| Controller Discovery | If value is true then HyDesk can discover HyWorks Controller in the network. This is also controlled from System -> Service config -> Discovery Settings. Broadcast port is used as configured in Advance config -> Controller Discovery Port (default: 39003) |
False | - |
| Deliver Applications to Client Version Onwards | Client with version and above supports Applications delivery | 300000 | - |
| Define/Specify device time zone | Specify timezone to be enforced on HyDesk. | IST | - |
| Enforce time zone | Enforce time zone to HyDesk. Expected values: True Or False, Default value: False | False | - |
| Stop Controller-HyDesk Date Sync | If this is set true then HyWorks Controller will stop sending Date to HyDesk on registration call, HyDesk stop syncing date with controller. | False | HyDesk |
| Heartbeat Interval | All endpoints use this interval to communicate with HyWorks Controller, also any relevant configurations on endpoints can be set using this heartbeat interval. In large deployments with too many desktop clients, the heartbeat interval can be increased to improve performance overhead of processing heartbeats from too many endpoints. Note: Increasing heartbeat interval causes longer gaps in communication with endpoints and thus any settings changed on controller will take effect as per configured interval. |
40 | Heartbeat, Interval |
| In Session HyDesk Heartbeat Timeout Multiplier | With user-logged-in heartbeats are also usage this configuration to increase default heartbeat time, which means if a device with no user logged-on sends heartbeat in 40 seconds, the same device with user logged-on will send heartbeat in 40 * 3 (Consider multiplier is set as 3) = 120 seconds. | 3 | Heartbeat |
| Heartbeats Allowed to missed | This value is configure number of times heartbeat missed allowed, beyond that HyDesk is marked as disconnected. | 3 | Heartbeat |
| TCP user timeout | The TCP user timeout controls how long transmitted data may remain unacknowledged before a connection is forcefully closed. Value in Second, Default value is 9. | 9 | RDP |
| KeepAlive interval | Keepalive interval is the duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received. Value in Second, Default value is 2. | 2 | RDP |
| KeepAlive count | Keepalive count is the number of retransmissions to be carried out before declaring that remote connection is not available. Value in Second, Default value is 3. | 3 | - |
| KeepAlive idle | Keepalive Idle is the duration between two keepalive transmissions in idle condition. Value in Second, Default value is 5. | 5 | RDP |
| Disable HyDesk Activity Monitoring | By default, endpoints sends timer details if any user activities are there or not, but in cases where user has logged-in, active on desktop but not accessing any desktops/ applications. In such cases HyWorks usage this flag to determine if information sent by endpoints about user being active should be considered or not. It should be kept as true as HyWorks will then ignore user activeness details by client with no desktops or apps accessed. | True | - |