VM Scale Booster Prerequisites
To install the Accops VM Scale Booster setup on a Windows desktop system, the following prerequisites must be fulfilled:
Hardware Requirements
Accops VM Scale Booster can be installed on Windows machines (physical or virtual) with the following minimum configuration:
Minimum Server Configurations:
-
Minimum 4 GB RAM
-
2 vCPUs
-
10 GB of free space on the installation disk for installation, dependencies, and post-installation management files.
Note
Actual server sizing should be determined by the anticipated user load and user profiles, including application types and browser instances.
Where to install VM Scale Booster
VM Scale Booster is typically deployed to reduce communication overhead with agents on desktop VMs; therefore, placing it on the same server as the Controller defeats its purpose. It is recommended to install it on a separate Windows server from the HyWorks Controller.
However, as needed for deployment, VM Scale Booster can still be deployed on HyWorks Controllers. When configuring VM Scale Booster settings, the load balancer must be placed in front of the message queues, and its address must be configured on the HyWorks Controller.
Supported Operating Systems
Accops VM Scale Booster works fine on all Windows servers that HyWorks Controller also supports.
Important Software Requirements (RabbitMQ)
Accops VM Scale Booster relies on RabbitMQ to support its features, such as desktop agents pushing updates to queues and directly to the HyWorks Controller database. This section will provide detailed information on installing and configuring RabbitMQ and its dependencies.
Compatible Erlang/OTP and RabbitMQ Versions and Download Links
This section of the document provides the latest version(s) of RabbitMQ and Erlang OTP supported by HyWorks modules that require these components.
Important
About RabbitMQ and Erlang/OTP
-
It is highly recommended to keep RabbitMQ and Erlang/OTP interoperable, following the guidelines. Refer to Erlang Version Requirements | RabbitMQ for details.
-
Not all minor versions are being tested, so it is highly recommended to use the mentioned minor versions.
-
Please check the EOL of RabbitMQ and supported Erlang/OTP versions.
-
Important points to note for ASP.NET Core and .NET Desktop Runtime
-
Download and install only the recommended major version. You can select the highest minor version available. For example, if the recommended version is v8.0., then use 8.0.x. Do not use 8.1.x* or higher.
-
The official site recommends installing the desktop runtime by default, which includes the .NET Runtime, so explicit installation of .NET Runtime should not be necessary.
-
v4.0 Series
| Accops Module/ Release/Latest Version | Compatible HyWorks Controller | Latest Verified RabbitMQ and Erlang/OTP Version [Recommended] |
ASP Dot Net Core and Dot Net Desktop Runtime | Minimum Verified RabbitMQ and Erlang/OTP Version [Supported but not recommended] |
|---|---|---|---|---|
| VM Scale Booster v4.0.0.169 [v4.0] |
v3.6-SP2 and the latest available hot-fix (if any). | RabbitMQ: 4.3.2: Download from here Erlang/OTP: 27.3.4.13: Download from here |
Not required for VM Scale Booster. | RabbitMQ: 3.13.6: Download from here Erlang/OTP: 26.2.5.16: Download from here |
| Scheduler v4.0.0.221 [v4.0] |
v3.6-SP2 and the latest available hot-fix (if any). | RabbitMQ: 4.3.2: Download from here Erlang/OTP: 27.3.4.13: Download from here |
ASP Dot Net Core 8.0.* Dot Net Desktop Run Time 8.0.*: Download ASP.NET and .NET Desktop Runtime from here |
RabbitMQ: 3.13.6: Download from here Erlang/OTP: 26.2.5.16: Download from here |
| Action Processor v4.0.0.172 [v4.0] |
v3.6-SP2 and the latest available hot-fix (if any). | RabbitMQ: 4.3.2: Download from here Erlang/OTP: 27.3.4.13: Download from here |
ASP Dot Net Core 8.0.* Dot Net Desktop Run Time 8.0.*: Download ASP.NET and .NET Desktop Runtime from here |
RabbitMQ: 3.13.6: Download from here Erlang/OTP: 26.2.5.16: Download from here |
| Session Recording Manager Server v4.0.0.102 [v4.0] |
v3.6-SP2 and the latest available hot-fix (if any). | RabbitMQ: 4.3.2: Download from here Erlang/OTP: 27.3.4.13: Download from here |
ASP Dot Net Core 8.0.* Dot Net Desktop Run Time 8.0.*: Download ASP.NET and .NET Desktop Runtime from here |
RabbitMQ: 3.13.6: Download from here Erlang/OTP: 26.2.5.16: Download from here |
| Policy Engine v20251113T1240 [v4.0] |
v3.6-SP2 and the latest available hot-fix (if any). | RabbitMQ: 4.3.2: Download from here Erlang/OTP: 27.3.4.13: Download from here |
Not required for Policy Engine. | RabbitMQ: 3.13.6: Download from here Erlang/OTP: 26.2.5.16: Download from here |
References:
-
Erlang/OTP and RabbitMQ Compatibility: https://www.rabbitmq.com/docs/which-erlang
-
Download links for RabbitMQ and Erlang/OTP Versions: See the tables above for official download links.
-
RabbitMQ Configuration Script: Required for configuring RabbitMQ to be used with HyWorks modules.
Erlang OTP Installation
Refer to Erlang OTP Installation for the installation steps.
RabbitMQ Installation
Refer to RabbitMQ Installation for the installation and configuration steps.
At this point, the server is ready and has the prerequisites to install VM Scale Booster.